How to Set Up Your Secure View Camera With The myQ App – Video

by kory972@yahoo.com
How to Set Up a Chamberlain Secure View Belt Drive Wi-Fi Garage Door Opener in the myQ App

How to Set Up a Garage Door Opener with Integrated Camera in the myQ App

The video demonstrates how to set up your Chamberlain Secure View DC Battery Backup Belt Drive Wi-Fi Garage Door Opener. We will walk you through connecting to Wi-Fi so you can control the garage door using the myQ app and setting up the camera so you can view inside the garage from anywhere that you have an internet connection.

This video is intended for demonstration purposes only. Please consult the manual for complete instructions and safety information.

Set Up the Chamberlain Secure View Smart Garage Door Opener in the myQ app

Before you can connect your Wi-Fi Garage Chamberlain Secure View Door Opener with an Integrated Camera to your home network, you will need:

chamberlain secure view camera
chamberlain secure view
  • A smartphone
  • 2.4GHz home Wi-Fi network
  • A strong Wi-Fi signal in the garage. For help with determining this, see How to test the Wi-Fi signal strength in my garage
  • Your Wi-Fi network name and password

Connect using an Apple® iOS mobile device

  1. Create a myQ account. If you already have one, log into the myQ app.
  2. On the Device screen, tap the + (plus) sign in the upper right corner.
  3. Tap Garage Door Opener with Wi-Fi Ceiling Installed on the Device Setup screen.
  4. Review information on the What You Need screen and then tap Next.
  5. Choose the type of Wall Control that looks like your product and follow the instructions to activate the Wi-Fi learn mode.
  6. In the myQ app, tap Next.
  7. Tap Yes when you hear a beep.
  8. Leave the myQ app and go to your phone’s Wi-Fi settings.
  9. Tap the network that begins with myQ-XXX.
  10. Return to the myQ app and tap Next.
  11. Select your home Wi-Fi network from the list.
  12. Enter your network password and tap NextYour garage door opener will now connect.
  13. Name your garage door opener and tap Next.

At this point, you have successfully connected your Wi-Fi Garage Chamberlain Secure View Door Opener to your home’s Wi-Fi network. Next, you will need to connect the Integrated Camera to your home’s Wi-Fi network.

Secure View Smart Garage Door Opener in the myQ app
Secure View Smart Opener myQ app

Integrated Camera Setup

Set up your camera using the same Wi-Fi network

If you would like to connect your camera to the same home Wi-Fi network as your Wi-Fi Garage Door Opener, follow the steps below:

  1. Tap Ready on the Camera Setup screen.
  2. Review and tap Next on the What You Need to screen.
    Note: If Bluetooth is not enabled, a message will appear asking you to enable it.
  3. Review and tap Next on the Open Camera screen.
  4. Tap your Camera on the Discovered screen.
    Note: The camera will copy the home Wi-Fi network name and password that you used when connecting your Wi-Fi Garage Door Opener.
  5. Tap Finish on the Success screen

Congratulations! You’ve successfully completed the setup.
Note: If the setup fails, the app will prompt you to reset the camera by holding the reset button on the side of the camera for 10 seconds. Once released, the LED  light should turn off and then turn solid white. You then tap start over and select Secure View Camera from the device list. This will take you to step 2 above.

Connect using an Android mobile device

  1. Create a myQ account. If you already have one, log into the myQ app.
  2. When prompted in the app, enable Location settings.
  3. On the Device screen, tap the + (plus) sign in the upper right corner.
  4. Tap Garage Door Opener with Wi-Fi Ceiling Installed on the Device Setup screen.
  5. Review the information on the What You Need screen and then tap Next.
  6. Choose the type of Wall Control that looks like your product and follow the instructions to activate the Wi-Fi learn mode. Tap the network that begins with myQ-XXX on the Discovered screen.
  7. Select your home’s Wi-Fi network from the list.
  8. Enter your network password and tap Next. Your garage door opener will now connect.
  9. Name your garage door opener and tap Next.
  10. Tap Finish to see your new device in the app.
  11. Tap the garage door to activate the opener.
  12. Congratulations! You’ve successfully completed the setup. Next, you will need to connect the Integrated Camera to your home’s Wi-Fi network.

related articles

Leave a Comment

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept