How to Program Chamberlain 953EV and 956EV Garage Door Opener Remote Controls

by kory972@yahoo.com
This video demonstrates how to program Chamberlain 953EV and 956EV remote controls to a garage door opener.

Chamberlain 953EV 956E Instructions

  • Remove the visor clip and press and hold the program button on the back of the remote control until the LED light on the front of the remote turns on.
  • Press and release the remote button you wish to program ___ times, as indicated above.
  • To exit programming mode, press any remote control button except the button that was just programmed.
  • Press and release the learn button on the garage door opener.
  • Press and hold the remote control button programmed in step 2 until the garage door opener lights flash or two clicks are heard.
  • To test, press the programmed button on the remote control
  • Install the visor clip.

To program the 956EV & 890MAX remote control

  • Use a Safety Pin or Paper Clip to press and hold the program button on the side of the remote control until the LED light on the front of the remote turns on.
  • Press and release the remote button you wish to program ___ times, as indicated above.
  • To exit programming mode, press any remote control button except the button that was just programmed.
  • Press and release the learn button on the garage door opener.
  • Press and hold the remote control button programmed in step 2 until the garage door opener lights flash or two clicks are heard.
  • To test, press the programmed button on the remote control

related articles

Leave a Comment

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept